Spedy
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Spedy
-
-
24 minutes ago, Adamw said:
Reluctor sensors will not work down to 0MPH, they will stop working at low speeds when the voltage output is less than about 1V.
DI11 is not connected on the Supra ECU.
tell me where else can I get signals from abs sensors to track the speed of the front axle. I need this for traction control
-
On 29.02.2020 at 23:58, Adamw said:
Цифровые входы подключаемого блока ECU указаны для максимальной частоты 500 Гц, в вашем журнале вы работаете на частоте около 1600 Гц, когда скорость заднего колеса начинает падать.
Датчики ABS обычно имеют слишком много зубцов для вставных цифровых входов ecu. Если вы не используете ABS, вы можете отшлифовать половину зуба, или вы можете сделать / купить небольшой делитель частоты.
1. It's not about the peak of the graph, but about the beginning and end. The problem is that my ecu does not see speed from 0 mph. 2. I found DI 11 in the firmware, but no DI 11 in the pinout. Where to look for him?
-
Good afternoon, help me figure out why the speed does not work with 0. car toyota supra jza80 1996 usa.
Speed taken with abs sensors
09.09.18 supra for link forum.pclr
ECU Fault Code 84: Aux9/10 E-Throttle 1 IC Over Temperature / Under Voltage
in G4x
Posted
Good afternoon. I upgraded from LINK G4 + to LINK G4X. Help me deal with the ECU Fault Code 84: Aux9 / 10 E-Throttle 1 IC Over Temperature / Under Voltage error. I attach the firmware and log. Also in the log you can see that when I press the throttle The connection with the laptop is lost.
supra Throttle error 84.pclx Throttle 84 code.llgx