DriftCentral
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by DriftCentral
-
-
if you can post a pic of your E-shaft(crank)angle sensor complete with the entire trigger wheel, would be able to better advise and would be able to give correct instruction on how to calibrating that particular trigger
-
From my understanding shouldnt his trailing map have all negative values, -12 isnt bad from my experience, until he can get to a dyno.
I think i got this one
-
a bit confused
pls give more information on the setup and your goal/s or intension/s
-
thanks for the reply, its a boosted FD engine and yes i totally get what you're saying and yes that particular engine porting was pushed as much mechanically possible.
Was hoping there is something i may not be aware of
which would have helped smoothen things out a bit , just my luck :D
-
unfortunately i dont have any logs but i will post one as soon as i have access to the car again, its has a 90mm RW throttle, and a xessesive LIM. i may have another which may have same or similar issues, sorry for the late reply, hope to get back to you soon with that log btw its g4 unit and yes im using map as load, do you think its advisable to use bap/map xover ?
-
pls give more information on the setup and your goal/s or intension/s
FD Rx7 log first fire
in G4x
Posted
Did you pressure test the primary rail for leaks after installing the 850CC in there ?
its also advisable to get another new set of spark plugs an try again, in some rear cases i have actually got bad plug or plugs which doesnt fire at all new out of the box. you can try with less fuel and increase until it sounds like its gonna start up to avoid fouling the new ones. you can also use the ignition test function to test the coils and spark plugs.