Spyrosgeo
-
Posts
39 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Spyrosgeo
-
-
I'm sorry but i forgot to ask what trigger 1 setup i must use.
-
Hello guys and happy new year,
i have a Renault Megane II rs (2004-2010) 2.0L 163HP with FTR engine code.My concern is becauce it hasn't cam sensor. How to make it work with sequential injection mode?
TriggerScope:https://www.mediafire.com/file/48q3zv29ecsnujf/MEGANE_triggerScope.llgx/file
-
Hello guys happy new year,
i wonder if distance on dashboard will work with this this parameter on can setup(Stream 7) after taking a look at https://www.madox.net/blog/projects/mazda-can-bus/ .
Also steering wheel stop working and light up steering light.The only change from g4+ file i have make is on multiplier to make the tacho sees correct.
What do you advice me to do?
The file:https://www.mediafire.com/file/4rlzy25wscp501u/Xtreme_RX8_CAN.pclx/file
-
Hello guys,
I have a Mazda Rx-8 with sr20 swap. I use rx-8 alternator that use pid setup and my question is Can i use alternator control settings from mazda mx5 nb2 1.8 g4x?
Thanks.
-
Take a look at my setup and pc log.
As you can see when the e-throttle is on target at 1.6% suddendly drops at 0% and goes back to 1.6%.
Also the e-throttle isn't stable under some conditions when it goes up to certain rpm.
Here is the pc log:
https://www.mediafire.com/file/2i3g44wbptbqagd/PC_Datalog_-_2023-08-25_9%3B10%3B34_pm.llgx/file
-
Hello,
I have a suzuki swift and i have a problem with e-throttle.I can't match PID parameters.
Can someone please help me?
-
Hi guys,
I have a Suzuki Swift VTC (M16A) with fury g4x.
I use settings from the manual and i am suffering with slow starting.With stock ecu starts regulary.
I have noticed trigger 2 has slow synchronization.
What can i do to start up like as before ?
Take a look from triggerScope and log during cranking.
https://drive.google.com/drive/folders/13NW287z1m8MBt-NhYREXIJoAN4W8yDc4?usp=sharing
-
Hi,
I have a suzuki jimny 2009 (fourth generation) and i have a problem with the temperature gauge. In accordance with sketch on carmin I connect pin 32 with inj 5 and i use aux pwn but i can't make it work.
Any idea?
-
Hi,
I have a GTRLINK-NGTRX ecu and i want to connect E-throttle. On which pins i must connect E-throttle motor?
-
Finaly i install a trigger disk (36-1) on crankshaft.I use hall sensor .
I have 4 trigger scope on (1200,5000,7000,7700)rpm.
The problem is on 7600rpm the engine is like as limiting .
On the same time trigger counter is increasing and trigger 1 state (blank time).
Take a look what i see
-
On MDC i must connect on round connector ?
if it is on whuch pin on round connector?
What can setup i must use?
-
Hi,
I want a clarification.
I own an evo 7 with motec ecu and motec differential controllers . This devices communicate with one wire and my question is if link can communicate via one wire with differential controller .
-
Hello guys,
I have install a altezza ecu on a 2jz engine,and i wonder if i can connect 2nd knock. Also where i can connect it.
Thanks
-
Hi,
I own a Toyota ae86 with atomX. It runs a 4AG engine with dristibutor. On trigger 1 it has 24 teeth and on trigger 2 , 4 teeth.My problem is that I can't cut 3 teeth on upper because the car must start with stock ecu due to the Race rules.
What can I do to solve the problem ? -
-
Hi guys,
i have a AIM 1.2 STRADA 5' .I can't add gear.Ecu read it.
What i must add?
Can someone help me?
Check the following file
-
Hi,
we have a 2jz vvt-i engine with g4+ storm.We have a problem with vvt,it malfunction.You can see it on picture 'vvt problem'.
Also i test vvt with a fury g4x and it works correctly with the same calibration.
What we must also check ?
-
Thanks for your help it works perfect.
-
Hello ,
we own a LS3 engine . The engine is brand new . we have a problem with the start up . The problem is on 10 times only ones engine starts and all the other times is like ignition on the other cycle . If I stop ignition and reigition the engine starts . I use LS3 trigger mode I upload 3 triggers scopes the first file is on ognition with ignition off . The second file is on ignition . The last one is on idle .
can you see any fault ?
TriggerScopeLog LS3 PROBLEM CRANK NO RUNNING NO IGNICION.llgx TriggerScopeLog LS3 PROBLEM CRANK NO RUNNING.llgx TriggerScopeLog LS3 PROBLEM CRANK.llgx
-
-
Hi,
I have a Honda civic R18A .This car producted from 2004 to 2009.Which trigger mode is correct to run?
Check triggerscope .
-
I disable ignition and this is the result.
-
I send a demo file with trigger setup and trigger scope log.
What do you believe?
ford puma 1.7 vvt demo.pclr Trigger Scope Log 2021-01-13 3;49;29 pm ford puma 1.7 vvt.llg
-
Hi and happy new year.
I have a problem with ford puma 1700cc vvt. On trigger mode i have select ford duratec vct. I read correctly engine speed, the engine start, vvt works all is fine. If i stop the engine and recrank it to start sometimes start, sometimes not.
When it doesn't start the engine sound like as ignition on wrong cycle.
If i recrank the engine may start and work correctly.
I send a trigger scope.
What do you believe is wrong?
Mazda rx8 basemap
in G4x
Posted
Finally,steering wheel problem solved.It has electrical problem.
Also my question for distance on dashboard is remaining.