[Running Walbro 450LPH Pump(s) with Razor]

Wow that is super helpful! Thank you for linking me to that. Seems like I should be able to power each pump from its own 25amp output. 

[Running Walbro 450LPH Pump(s) with Razor]

I have a Link PDM on order currently. In the meantime I am mapping out what I can run with it.

My current needs are, Injectors, Spark, Ecu, Spal Fan, and 2 Walbro 450LPH  Pumps. 

I am reading mixed information on how many amps the walbro pumps run. They are currently wired with relays that are triggered by the ecu, and work fine. However, It would be nice to have them powered through the PDM if possible. 

Does anyone have insight on how many Amp's these draw, and if I will run into issues by trying to utilize the 25 AMP output to power a single Pump?

 

Thanks,

-Mike 

[Using a PNP ecu as a universal wire in?]

I appreciate the response! It’s about in-line with what I was thinking myself. Just happy to hear someone having success.

[Using a PNP ecu as a universal wire in?]

Hi all,

I have a vr4link g4+ Currently and I am curious if I would be able to get the proper connectors for it and wire it up in my evo swapped mirage? Basically treating it as a wire in extreme unit?

 

[Weak spark car won’t start evo8+ in 2g Dsm]

I had to swap the Fuel pump and AC clutch outputs in order to get my evo 8 to fire. Says it in the manual that you may need to do so. I had the same issues as you and that solved my problem.