DriftKr6l
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by DriftKr6l
-
-
Hey Guys,
I have a problem, when I plugged into my G4+ ECU it said that it is e throttle capable, but it looks like it lacks the correct plugs to support ethrottle? What is up with that?
Here are the details
Here is the actual ECU
-
Hey guys,
I am doing a E-throttle conversion on a Evo9 using EvoX throttle and pedal.
Can someone please provide a wiring diagram for this?
Looking for details on where each cable from the throttle body and the pedal needs to be connected.
I am using a G4+ evolink with e-throttle control, main board revisoin 1.4, top board G4+ Xtreme .
Thank you for the help.
-
Thanks Adam, appreciate the help.
Ill look at the serial number, if its 10000< then what?
Would this expansion loom do the job and give me all the pinouts I need ?
Or is this the correct connector so I can make my own?
https://otakugarage.com.au/product/canbus-connector-kit-for-link-g4-plugin-ecu/
It would suck to have to buy two expensive cables just to get two wires out.
-
Thanks for the info.
Is there pin out info somewhere that would tell me where I can tap into the ECU with the AIM display?
-
Since the AIM MXS display uses CAN and I believe the G4 does not, is there still a way to hook up the display?
The G4 is a Evo9 plug and play.
Thanks for the help
-
Hi,
Where can I find the base map and will this ECU support everything?
The goal is to do a custom loom.
EVOLINK G4+ with ethrottle but no plugs on the board to support it?
in G4+
Posted
Thanks for the quick reply