[Borg Warner speed sensor on G4+ Fury]

Hello, i have a Borg Warner EFR turbo on my 2jz and mounted their speed sensor on it. Is it possible to make the Fury to read and show the rpms and may be make it to take actions if maximum rpms of the turbo are exceeded? Thank you!

[G4+ Fury DBW 73 aux 9/10 error code]

Thank you very much, will check those. The car is with brand new HP Electronik PDM, so no relays. Will check connections.

[G4+ Fury DBW 73 aux 9/10 error code]

Hi again, we procede with trying to make break in tune and immidiately after car start to move two problems occur. First one is, after very short(100-200-300 meters) drive with light throttle the ECU throw error code 73 aux 9/10 and switch off the throttle and after shut down and restart the ignition it works again, but its occurs again everytime. When playing with throttle in neutral without driving the car it almost non existent, if any. The next strange thing we saw is that when we switch on and off ignition without starting the car, one time the ECU switch on the throttle relay and one time it didn't. We manage to capture on logs the moment when it happens. I am attaching the ECU file and the logs.

E92 2JZ BASE TUNE 28.4.22.pclr LOG BLIP.llg log thr new.llg thr error 55.llg THRPTTLE BLIP 2.llg

[2JZ trigger scope check]

Thank you!

[2JZ trigger scope check]

Hi, could someone check the trigger scope of my 2JZ GE, which we convert to turbo and with sequential spark/fueling. We put a GTE VVTi oil pump with 36-2 trigger wheel on the crank and we are using the oem distributor just for cam signal. Thank you!

[BMW M50 VANOS trigger scope check]

But injection can be used sequentional, right? There is 8 injection drives. And what will be the dissadvantage to use wasted spark?

[BMW M50 VANOS trigger scope check]

A little different question, could i use my Link Fury to run LS1 turbo engine?

[BMW M50 VANOS trigger scope check]

Can i use cal1 table, set it to ohms and type in the boxes the resitent values of the sensor? And if i can do so, which pull up to choose 1kohm or 10kohm? 

[BMW M50 VANOS trigger scope check]

Hi again, we tuned the car yesterday with good results, but i have another problem, i think temp sensors, especialy coolant one, shows much higher temp then it realy is. How to calibrate them accurately? Before i had same problem with Ecumaster and one guy boil them in oil, but he tolds me that different ecus have different resistors and may be the values will be different, but i dont know did he measured them, connected to the ecu or not.

[BMW M50 VANOS trigger scope check]

I did what you told me and it works, thank you. I setted the base timing with stroboscope. Now i have different problem, i cant manage to run the pwm cooling fan which i used with the Ecumaster, before i swap it for the Link. Are all 10 aux outputs of the fury able to.run it and do they have build in pull ups?

[BMW M50 VANOS trigger scope check]

Thank you very much! Ill try it as soon as possible and report back.

[BMW M50 VANOS trigger scope check]

So, strange things start to occur with the modified trigger wheel. First the car wont start on Cam pulse x1 Sync mode like before and i managed to start it on Cam level setting, but more strange is how the trigger scope looks like. The scope is taken on runing engine and engine dont run good.

 

 

[BMW M50 VANOS trigger scope check]

What you think about this option? 

 

[BMW M50 VANOS trigger scope check]

Hi, i have a freshly installed G4+ Fury and experince several problems, so firstly i want to know that my triggers are setted right. Thank you very much in advance for the help.

The motor is BMW M50B25 VANOS with inductive/reluctor crankshaft sensor  and hall camshaft sensor.