Jump to content

7thSaint

Members
 View Profile  See their activity

  • Posts

    11

  • Joined

  • Last visited

 Content Type 

Posts posted by 7thSaint

  2. Engine died while running

    in G4+

    Posted

    Thanks Adam.

    I haven't had the time to test that yet.

    However, pin 18 seems to be the main ground as its listed as the ground pin in all manuals that i came across.

    In that case, could u list down all ground pins so I can test all of them individually, in case its not pin 18? 

  4. Engine died while running

    in G4+

    Posted

    Hi Adam,

    Finally i could connect with the ecu but only when the ecu hold power on after i removed the key. When i turn the ke to 'ON' position it gets disconnected. 

    Any ideas? 

    The following thread may have some relation to it...

     

  6. Engine died while running

    in G4+

    Posted

    Done the test at ST Wangan where i bought the JZXLINK & they could connect to their laptop... will test on my laptop later after i reconnect the ecu back home... if the problem persists i will uninstall & reinstall pclink together with the usb driver & see how it goes from there... will keep u guys posted on the development... 

    Thanks again guys... u r the greatest...

  8. Engine died while running

    in G4+

    Posted

    Its JZXLINK G4+ and yes its fitted in Altezza. The car had a JZX100 swap back in 2009 and  was running on stock ecu since. A month ago i installed the JZXLINK and it was running fine without a hitch. No error code at all before it happened.

  9. Engine died while running

    in G4+

    Posted

    Hi Vaughan,

    Both blue and green lights were blinking indefinitely even after 30minutes. It blinks 3 times then a pause followed by another 3 times. Power cycling the ecu by unplugging the main socket only stopped the lights. Still unable to connect the laptop afterwards. The laptop could only detect the connection with the setting - COM8 & Auto (max 625k). Other connection settings did not work. 

    IMG-20200614-WA0070.thumb.jpg.c6a90f405723b68156c0ca58d72051f8.jpg

    Removing the key did not stop the light

  11. Engine died while running

    in G4+

    Posted

    hi all, i was running the car this morning when the engine suddenly died and pclink was disconnected. Checked all lights worked, fuel pump worked,  the engine cranked fine but would not start. I could not connect my laptop to the ecu as well. 

    After cranking the green light & blue light on the ecu are blinking even though i removed the key. 

    Any thoughts?

×
×
  • Create New...