-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Benzilla15
-
-
-
Thread can be deleted i fixed the problem it wasnt a Link issue
-
-
ECU- SupraLink
I disconnected my battery and unplugged the ecu to do continuity tests on my trigger wires as i was having a trigger issue, how ever now i have no Check engine light, no Battery light and no oil light when i switch to 3rd ignition my laptop now has no communication to the ecu
Ive pulled every fuse on the car none are blown any ideas? its a Toyota supra mk4 manual NA-T
-
Afternoon Adam, right so i done the trigger scope and none of them flinched there was nothing no activity how ever trigger 1 still turns green when i turn the key so i dont understand, also i have discovered i have another issue TP Main reads 3.7% constantly i touch the pedal it goes down to 0.0% almost instantly, my assumption is its not wound back correctly when fitted to my throttle body would you aggree? and also would that stop triggers?
-
The car does have a distribuorr currently and after some tinkering and a friends working car ive narrowed it down to faulty ignitor (5 pin plug that sits on the body ) i put mine on his car and it didnt start i couldnt put his on mine as we wasnt at my car i have ordered another ignitor once installed i will update, and thank you for showing me how to do the trigger scope i will do this once the new ignitor is fitted.
Yes its a G4+ xtreme
-
Hi im doing a NA-T conversion so im new to the standalone ECU side of things the car was running on this ECU i pulled the engine rebuilt it and put a FFIM on, Now when i turn the key it cranks ive got fuel but no spark i used the F12 feature to display my runtimes and ive got trigger 1 yes but no trigger 2 could someone please tell me where i need to be looking as i know these dont have a crank sensor
So where does it accuire its trigger 2 signal
through this process 3 wires have been extended but i have checked continuity and they all have connection.
Help ECU is dead
in G4+
Posted
Thank you adam, The problem was E27 they didnt solder the joint and it came off when i pulled the loom out the other day Problem fixed thank you