Little green sumo
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Downloads
Posts posted by Little green sumo
-
-
Ray
We use a V88 marine on kawasaki jet SKI.
We use the same setting like you define in your post reply.
We calibrate the offset to 244° and the timing delay to 160ms. (200ms seems to be better)
the coils are the OEM and the module is a Bosch 200.
the timing advance doesn't move when the rev up and down from 1000 to 7500 rpm.
with the calibration OFF we checked the igniton timing advance.
when we check the timing advance on the crank we found that the ignition timing advance decreases when the rpm increases.
we use a simulator whit OEM reluctors. the ignition table is fully filled in with the same value. all the corrections are disabled.
With 20° as reference , the igntion timing is right at idle or 2000rpm then the advance decrease to 12 degree gradualy when thr rpm increase.
waiting for your help
Regards,
Little green Sumo
-
Jim
Can you tell me the problem you have found on your autronic meter
Thanks in advance for your reply
Francis
Ray,v2 and v3 are wired correctly, but with more investigation we have found the fault but not the cause!!!!
i will email you my phone number so you can get in contact with me. it will take me forever to write an email explaining our findings
regards
jim
CAN or CANopener
in ViPEC V Series
Posted
Jason
I am really impressed by the great job you made.
We have new project for new personal watercraft.
we use V88 marine and we would like to use the genuine dash on our racing boats.
Can I email the information we have in order to know if your device could manage this Dash.
Could you please let us know more details of your system.
Please find my email [email protected]
Thanks in advance
Regards,
Little green sumo