[Internal knock issue G4+ Thunder]

Hello all. I have an issue with G4+ Thunder. After 5-10 min of working Knk level on both sensors stucks and didn'n work while restart ECU. Sometimes it stucks after PC logging is stopped. Anybody knows that problem?

And something else. I've configured fuel cut depended on gear shift without additional fuel correction, only fuel cut. After shift event I have A/F below 9 for about 1 second. If I disable Gear Control in gear shift moment I have stabe A/F around 11. Could it be bug? 

[Cruise control enabled but Cruise light Is OFF]

Hello! When Cruise Light can be fixed?

[Cruise Control Setup]

On 6/11/2020 at 1:09 AM, Adamw said:

If your cruise switch is the type that varies resistance depending on which button you press, then yes you will need a pull-up to 5V.  Usually 1Kohm works ok.  

Thanks! Already tested with 10kOm. All is OK!

[Cruise Control Setup]

Hello all! I have a question. Will I need to make pullup +5v over 1-10kom resistor to CCS wire? CCS wire connected directly from steering wheel.