[G4X and Grayhill CAN Keypad]

On 7/27/2021 at 6:56 AM, Adamw said:

Yeah if you know CAN well enough and you have plenty of spare CAN channels and GP outputs spare you will be able to get some basic functionality working.  But it is not enduser freindly for someone that doesnt have a good gasp of CAN.  As you have noticed some functionality has been added in preperation such as CAN DI latches and there has also been things like failsafe/timeout/fault logic added in the background.

You need a wakeup message, heartbeat message, LED message, key message, optionally brightness and back light messages.  From memory in the CANopen versions you can disable the need for wake-up and heartbeat but they are required by default.  

Im sorry to dig up an old thread.

Im currently having issues trying to get my Link g4X to turn on one of the pins on a microPDM , ive got eveything else working how i want it to. i just need the ecu to trigger output 4 to control my fuel pump. and no using another output on the link isnt really an option.

any help would be EXTREMELY helpful! 

thanks in advance,

[Re: AIM Dash Setup with Vipec]

Hey all, im having the same issues.

ECU - Vi-pec V44 plug in for skyline serial 11101

Dash - link mxg strada street edition.

Im having issues with the communication between the two of them currently. i have gotten the dash to display a couple of things from the ecu, water temp is showing 280 degree but it couldnt be much above 30degree (C)  and rpm is stagnant at 2k on the dash regardless of engine speed. 

attached is the dash config file and a screen shot of the setup vipec side. any help would be EXTREMELY appreciated!!

MXG 1.2 Strada link .zconfig