Shamanyak
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Shamanyak
-
-
On 7/2/2019 at 12:08 PM, Adamw said:
Pin 4 is on the left, pin 1 on the right.
Pin 4 is the main power ground so needs to be decent sized wire. Pin 2 is secondary ground so can be smaller. Ground both to cyl head.
Pin 3 is the ign signal from ECU.
Pin 1 is +12V, again needs to be decent wire.
Dont give these too much dwell, they pull about 16A at 2.5ms, I usually stick around 1.8ms which is about 8A.
I want to connect bmw e30 m42 engine r8 coil, do you have a wiring diagram about it, can you help me?
BMW link g4 pnp with audi r8 coils
in G4+
Posted
Can an R8 coil be connected to a bmw m42 stock engine?