[2000 RS EJ20X swap wire-in G4+ Xtreme questions]

Yes that's the exact pinout I have, Just what i needed. Thanks again!

[2000 RS EJ20X swap wire-in G4+ Xtreme questions]

Yes this car originally had a 3 plug Ecu harness labeled b134

,b135, b136

The car is a Canadian 2.5rs

The engine was a sohc EJ251 

Also is there a way to send the correct signal to the tachometer? I'm guessing it won't read correctly with coil on plugs?

[2000 RS EJ20X swap wire-in G4+ Xtreme questions]

Hello Im almost done wiring an EJ20X with dbw into my 2000 RS. This is my first time using a stand alone, so I'm taking my time to double check everything before starting the car.  I am using:

*G4+ xtreme

*2000 Impreza RS manual

*Stock 04 jdm EJ20X with intake/exhaust AVCS wired and air conditioning 

*GM flex fuel sensor

*Car has been Converted to dbw with stock sensors

*CAN lambda controller on the way

All engine wiring is done using the link manual. I was almost done, but when I was pinning the A/B loom plugs for the Ecu I ran into an issue with the not getting any voltage from the power supply wires coming from the main relay. All fuses are good,The Ignition switch has ACC power and the main relay plug has 12v constant.

I thought the relay may be bad so I have a new one on the way. Though i've been reading that the main relay possibly needs some kind of signal or it won't power the ecu properly?

Im not using ECU hold power wiring to keep it simple. I also plan on using DI 9 or 10 for the lambda . I also haven't hooked up the ignition switch wire yet because the engine is COP. Do I need to bypass it somehow?

[2000 Impreza EJ20X Ecu Options]

9 hours ago, Adamw said:

If you fitted cable throttle then the Storm would be the lowest cost ECU we have that can do the 4 cams and have enough IO.  If you want to keep electronic throttle then the Xtreme is the next step up from the Storm with DBW control.  The Fury is similar to the Xtreme except has an internal wideband controller added. 

Basic comparison here:  https://linkecu.com/products/ecu-comparison-chart/

Ok looks like I'll go with the storm since I have a wideband already

Thanks again

[2000 Impreza EJ20X Ecu Options]

Hello I was recommended to buy a link ecu by a friend of mine. I'm currently finishing swapping a dual avcs ej20x from a 2005 jdm legacy gt into my 2000 Impreza rs. The engine is installed but unfortunately the stock ecu is canbus so stand alone is my best option.

I am just wondering what link ecus I can use to control both intake and exhaust avcs and keep my A/C. This is my first time using a stand alone ecu and I have been having trouble finding one that can run all four that's within my budget. It's a rally style build, but I will be daily driving it as well so I don't need anything too crazy. I can also convert the car to drive by cable to make things simpler.

Thanks