[Aem uego X-series 30-0300 wiring ecu grounds]

again thanks  for the info guys quick question about the signal ground on expansion I have that tied to a continental ethanol sensor may i share that with the wideband or a better question is and how many times can it be shared?

[Aem uego X-series 30-0300 wiring ecu grounds]

Thanks for the info are you saying originally you went to sensor ground as in to the o2 sensor ground and did something else or you are on a sensor ground?

[Aem uego X-series 30-0300 wiring ecu grounds]

Wiring wideband afr to an volt 7 through rear o2 sensor harness 2005 forester xt into the g4x confusion with the ground point for the brown 0-5v analog output negative my tuner sent this my question is where to ground to "ecu ground" could this be expansion 1 ground signal or something like taping into D3 D7 B12 or any of the ground similar or do i just ground to the ecu chasis itself meaning ring terminal under the securing nut of the ecu Thanks for the help in advance

 

1. First make sure the wideband gauge itself reads accurately/reasonably.  
2. Next, the AE wideband needs 12v switched power, and battery ground
3. The brown wire also need to go to ground; ecu grounds (not sensor ground)
4. Lastly, the white wire goes to analog volt 

[2005 subaru forester xt wrx104x wiring flex fuel to digital input]

Thank you for the information I was away from communications for a while.

[2005 subaru forester xt wrx104x wiring flex fuel to digital input]

Looking for help wiring cobb flex fuel sensor My tuner wants me to wire the sensor into digital input (DI6) we have already use an volt 11 for fuel pressure sensor.

any help will be greatly appreciated!

2005 forester xt/outfront performance grocery getter