Jump to content

Steveninouye

Members
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

 Content Type 

Posts posted by Steveninouye

  2. Can Lamda set up

    in G4x

    Posted

    So I bought the Canjst for my pnp link, I was wondering if the ground has to be a sensor ground or can it just be a regular ground to the chassis?

     

    thanks in advance

    Steven

  3. Link Pnp

    in G4x

    Posted

    thanks so much, unfortunately it looks like I'm going to have to use another unit as the plx is a 1 wire unit. So with that said, I have decided to go with the can lambda unit, my question is for my Subaru pnp 107x, if i use the can I saw that there are 2 different connectors to the ecu can you tell me what the difference is between the 2?

     

    thanks

  4. Link Pnp

    in G4x

    Posted

    On 4/25/2023 at 2:39 PM, Adamw said:

    For an analog output type wideband controller, yes you could either use an expansion harness or one of the unused analog inputs that are already there.  Most likely you are not using the airflow meter input, the rear O2 sensor input and possibly the TGV sensor inputs.

    Or preferably use a CAN bus wideband controller.  

    so can i just unpin the rear oxy and put the wide band signal through the an volt 7?

  5. Subaru 107x narrowband

    in G4x

    Posted

    2 hours ago, Adamw said:

    AN Volt 7 is connected to the rear narrowband sensor originally but as KO suggests it is not assigned in our base map so someone has changed yours, it has possibly had a wideband wired to it.  

    okay thanks, much appreciated

    also I was wondering what the APS source is on an volt 9 and 10?

  9. Link Pnp

    in G4x

    Posted

    Hi I just bought a link pnp 107x and was wondering I looked though the instructions and didnt see a pin for the OEM o2 sensor, I was wondering if my Subie would run on the oem O2 sensor?

     

    thanks for you help

    Steven

×
×
  • Create New...