N1KGTR

Hello,
Trying to set up the triggers on the ECU
Do I need to make any changes to the triggers pull up and edge or is it preset on the plug-in G4X?
Trigger 1 Pull Up - ON
Trigger 1 Edge - Rising
Trigger 2 Pull Up - ON
Trigger 2 Edge - All
 
Also for timing, I had the CAS set to 15 degrees, (while running on the OEM ECU) before I installed the G4X. Do I need to physically retime it or do I just adjust the offset when I have it running, if it's off?
Thanks!

Thanks Adamw. Will try to start tomorrow and see if I can run those values

I have a Link G4 Storm. I believe that the signal from the crank reference tooth  and the cam sync tooth must not coincide. What would be the minimum separation required in crank degrees.What would be the result if they were too close.