TurboLamik
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by TurboLamik
-
-
-
1 hour ago, koracing said:
Is there no pinout available for your actual ecu you can compare to the link pinout? More than likely toyota running the same motor with the same connector ecu will share most of the important pins - like power, ground almost certainly then possible and highly likely: trigger inputs, and injector and coil outputs. There's a chance they did not, but it should be possible to plug in and see if it powers up ok, and then perform some some basic trigger, injector, and ignition tests.
I literally just finished comparing and they look to be almost identical
http://wilbo666.pbworks.com/w/page/37134472/2JZ-GTE JZS147 Aristo Engine WiringI thought someone already did this
-
Plugs seem to be the same but not sure if it would be safe to plug in and try to start itThoughts???
-
21 hours ago, koracing said:
I would think the 1991 would have a different ecu connector and pinout - does the ecu connector look the same as the Supra Link?
Let me pull it out but according to a dealer in FL it should be pnp.
He sounded very confident but I wanted a second opinion
-
Does anyone know if the SupraLink - TS2JZX is a plugin for a 91 Aristo with 2JzGTE non vvti?
Im not worrying about the transmission as we will be swapping to a ZF 8HP and TurboLamik will handle the shifting.Main question is it pnp and will it handle DWB with the optional loom and additional wiring
Thanks
Greg
-
wish I knew anything about it
Look at the TORQUE software.
Looks like it could be adapted
http://torque-bhp.com/forums/?wpforumac ... &t=2502.00
Greg
-
...and even for just the gauges it would be awesome
For example here in US you can buy a brand new 7" android tablet for 80 dollars as oppose to AIM display that will cost you $1000 or more
Greg
Stock Supra / Aristo map
in G4x
Posted
Not yet