Stimmer
-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Stimmer
-
-
2 bsh
What engines are these maps from?
If they are not VVT, it may be the reason of such smooth shape.
My fuel maps are all from EJ20 DualAVCS engines. Maybe VE changes cause such shape due to dAVCS.
In fact car runs perfect an has huge torque and good power.
This discussion is just my curiosity.
-
Got the same problem, tried another laptop, seemed better, but sometimes the problem is still there.
And not only Mini plugin, I got this problem with STI plugin, but very very seldom. With latest firmware
no problems with STI at all.
-
Sutkale, thanks for feedback.
It is clear concerning one cell.
But what about map shape, why it is different from ecu to ecu. And Vipec map is rather rough. Autronic map, for example, looks very flat for the same car.
-
Simon, PCL file is sent via email.
-
Hi, all
Here is the best comparison of fuel maps. It is absolutely same car, I had free time on dyno, and mapped it to the same afr as it was with motec ecu, all other calibrations are simmilar
including avcs.
Maybe there are some spots where I did very rough tuning, but trend is clear.
And one more question, what is the difference between vipec, motec fueling and autronic? I tuned fuel in autronic ecu with only one sell in fuel table and target afr map.
It is impossible with vipec or motec. I think, that there is some kind of engine model, as tuner have to put CR in settings and injector parameters are rather strange.
P.S. Actually, I don't care what is the shape of the map, just want to know your thoughts.
-
Hi, warmup, are there any news?
-
Hi, all
I got question about fuel calc, I have fuel maps from lots of ej engines and after pretty much time of tuning Vipec ecus, I've noticed, that my fuel maps
for Vipec seem to be very erratic even after I slightly smooth them out. If I compare them to motec or autronic maps, I can find them much more consistent.
I compare maps for the same engine. What is the reason?
Here are some screens of vipec and motec maps after light smoothing.
Thanks.
-
warmup
Hi, when this device will be avaliable?
I'm very interested in it. Lots of projects are stopped because of installation problems.
Thanks.
-
Hello, all
Is there any possibility to make such kind of installation. As I understand the problem is in communicating with factory CAN bus.
I have seen such kind of setup in P-WRC cars. They are runnig Motec m800 plug in ECU in standalone manner and have no problems with can bus.
All systems like stock dashboard, DCCD/ACD and SI-Drive (STI) work.
Thanks in advance.
-
Email sent.
-
Hi, all.
Yesterday got problem with password protection on plug-in sti ver 6 vipec ecu. The point is that, when I enter desired password and hit "enter" knob on my laptop at this time all injector settings are reseted,
injector type changes from custom to siemens type, dead times are also change to some other figures than mine. I've upgrated firmware to latest version, but didn't help.
Thanks in advance.
-
Hello, all
Are there really advantage of MAP load calculation?
Why this type of load calculation is better than MAF?
Want to hear your points on this topic.
Thanks.
-
try to uninstall Nvidia video drivers, then install vipec usb drivers and back install nvidia drivers...
strange error happens with Windows 7 and nvidia video card drivers...
Thanks a lot for your help, just deactivated nvidia card and installed vipec driver easily)
-
Hello,
I got problem installing driver on my new laptop. Got message, that app crashed.
What can I do with that?
Ð˜Ð¼Ñ ÑÐ¾Ð±Ñ‹Ñ‚Ð¸Ñ Ð¿Ñ€Ð¾Ð±Ð»ÐµÐ¼Ñ‹: APPCRASH
Ð˜Ð¼Ñ Ð¿Ñ€Ð¸Ð»Ð¾Ð¶ÐµÐ½Ð¸Ñ: ViPEC USB Driver Install.exe
ВерÑÐ¸Ñ Ð¿Ñ€Ð¸Ð»Ð¾Ð¶ÐµÐ½Ð¸Ñ: 2.8.0.0
Отметка времени приложениÑ: 4c3f811f
Ð˜Ð¼Ñ Ð¼Ð¾Ð´ÑƒÐ»Ñ Ñ Ð¾ÑˆÐ¸Ð±ÐºÐ¾Ð¹: nvd3d9wrap.dll
ВерÑÐ¸Ñ Ð¼Ð¾Ð´ÑƒÐ»Ñ Ñ Ð¾ÑˆÐ¸Ð±ÐºÐ¾Ð¹: 8.17.12.9620
Отметка времени Ð¼Ð¾Ð´ÑƒÐ»Ñ Ñ Ð¾ÑˆÐ¸Ð±ÐºÐ¾Ð¹: 4f57c581
Код иÑключениÑ: c0000005
Смещение иÑключениÑ: 00001fc9
ВерÑÐ¸Ñ ÐžÐ¡: 6.1.7600.2.0.0.256.48
Код Ñзыка: 1049
Дополнительные ÑÐ²ÐµÐ´ÐµÐ½Ð¸Ñ 1: 0a9e
Дополнительные ÑÐ²ÐµÐ´ÐµÐ½Ð¸Ñ 2: 0a9e372d3b4ad19135b953a78882e789
Дополнительные ÑÐ²ÐµÐ´ÐµÐ½Ð¸Ñ 3: 0a9e
Дополнительные ÑÐ²ÐµÐ´ÐµÐ½Ð¸Ñ 4: 0a9e372d3b4ad19135b953a78882e789
ОзнакомьтеÑÑŒ Ñ Ð·Ð°Ñвлением о конфиденциальноÑти в Интернете:
http://go.microsoft.com/fwlink/?linkid= ... cid=0x0419
ЕÑли заÑвление о конфиденциальноÑти в Интернете недоÑтупно, ознакомьтеÑÑŒ Ñ ÐµÐ³Ð¾ локальным вариантом:
C:\Windows\system32\ru-RU\erofflps.txt
Thanks a lot in advance.
Fuel calculation question
in ViPEC V Series
Posted
And one more thing, guys
What axis do you use in VVT table. I think one is EngSpeed and what is the other?