nkm-erik
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by nkm-erik
-
-
It’s not a link branded dash. Don’t have any pictures of the wiring. I has an extra link tuning USB cable so i cut it and used the white and green wire.
white wire to the white wire from the dashgreen wire to the blue wire from the dash
red wire from dash to 12v
black wire from dash to chassie ground
-
13 minutes ago, Adamw said:
Can you attach your map so I can take a look.
A V88 doesnt have CAN2 as far as I remember - it just has CAN1 on the 6 pin round plug below USB.
heres the map.
at the moment can cabels are connected to the bottom can output port on the ecu
-
Hi. Having some Problems setting up my msx 1.2 strada. I have an old version of v88 with the hardware upgrade.
followed all instructions from aim and vipec.
but no info on the dash. Don’t know where to change datastream and baudrate. Also is it preffered to use can2 from b loom pinout or the green and white wire from the can1 connector?
any ideas? Anyone?
cheersOn the image you can see what happens When i press apply in the can settings in vts software
-
Hi!
does anyone have a basemap for v88 2jz gte (non vvti)1300cc injectors, vag coils, BMW DBW
cheers
erik
-
Having some problems with My dash2.
I have a g4+ storm in My Evo 8 connected to a dash2 (not PRO) using a RT can adaptor.
Rpm and all works fine but not boost and speed.
Loaded generic dash2pro settings in can setup with can id 1000.
What could be the problem?
-
just got an dash 2 that i connected with can interphase. i dont seem to get the boost pressure or oil pressure to work..
what equation do you use for the oil press signal from the ecu?
Aim can setup
in ViPEC V Series
Posted
Yes It’s set to link base
ok i’ll check the wiring but what i Could find those är the 3 and 4 pin in the connector