Jump to content

Dan No

Members
  • Posts

    5
  • Joined

  • Last visited

Posts posted by Dan No

  1. Reviewing the G1 v4 manual, I found this section:

    6.3.2 Trigger & Hardware Requirements
    Cylinder Pulse
    For the correct timing of ignition, the crank or cam sensor MUST provide
    a signal that can be decoded to produce one pulse per engine TDC.  On a
    4-cylinder engine for example, this is 2 TDC pulses per crankshaft
    revolution (4 per Camshaft revolution) and an 8-cylinder engine will have
    4 TDC per crankshaft revolution (8 per camshaft revolution)
    Sync Pulse
    To determine the correct firing sequence, a sync pulse is required as a
    reference to determine engine position. The sync pulse can only appear
    once on the crankshaft (1 signal per engine revolution) or once on the
    camshaft (1 signal per engine cycle).
     

    Here is the G and NE trigger signals from the cam-driven distributor.

    Waveforms-GNE.gif~original

    NE satisfies Cylinder Pulse 4 per Camshaft revolution requirement and
    G satisfies Sync Pulse once on the camshaft (1 signal per engine cycle) requirement.

    Which sub-board would be needed for this configuration? Would you be able to release technical-details on the sub-board functions or schematics? I would be able to build a sub-board if I'm not successful in finding one from one of your dealers.

    Thank you.

×
×
  • Create New...