Nigel D
-
Posts
5 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Nigel D
-
-
I have just fitted a M&W; cdi to my gtir pulsar and not quite sure if i have set the triggers up corectly. (running G4 plugin) I car starts and runs the problem is the fuel pump does not turn off after u turn the ignition off to accesarys. Trigger type is set to Opto/Hall and trigger edge is set to falling to match the CDI trigger mode set set to Nissan 360 Opto Trigger Any help would be much appricated
-
Cheers for ur help cameron. Im very happy with the end result.
-
Do u still have to run an igniter and balast resistor if u run a msd box?
-
I have a plug in G4 in my GTI-R pulsar and im after some advice on setting up the ignition side of the tune. I have currently fitted a MSD 6a with a HVC-2 coil. Ive set the ignition mode as Distributor, A Falling Dwell Edge but im unsure what to set the Dwell Control and Ignition Delay at Any help will be much appricated
CDI Triggers
in Engine Tuning
Posted
Fixed