Jump to content

Peter

Members
  • Posts

    4
  • Joined

  • Last visited

    Never

Posts posted by Peter

  1. Hi all. I'm a satisfied owner of PossumLink but i have a problem. This is the normal procedure with the usblink unplugged. First klick: the lights turn on -> Second klick: the fuel pump starts -> Third klick: engine starts. With the usblink connected. First klick: the lights turn on -> Second klick: the fuel pump starts after 5 seconds -> Third klick: engine starts. With the usblink and laptop connected. First klick: the lights turn on -> Second klick: the fuel pump is dead! -> Third klick: engine starts and the fuelpump start buzzing. The engine want runs properly and stops after some second. I can always read/write to the ECU with no problems, but still the engine wont run as i should. The laptop is an old one with WinXP Pro and the usblink drivers from the CD. I've notice that some adaptors have both usb and serial ports. My adaptor does only have usb, so i cant make a test with the serial port. I dont know if this is something unusual or something wrong/bug, but it works perfect as long as i dont start the engine.

×
×
  • Create New...