[Configure Aircon Req - EvoLinkG2]

LINK: Feel free to add someinput here?

[Configure Aircon Req - EvoLinkG2]

Also: PClink will not display an AFR table even tho this is selected and configured to a wideband input?

[Configure Aircon Req - EvoLinkG2]

I would like to configure the aircon request (DI4) as a usable input, but i am unsure what pin out from the ECU is required to activate this? Please note: the car no longer retains any of the air conditioning components.

[Evolink G2 ISC Openloop setup]

I have adjusted the tables from cold and can able to keep the idle rpm to a desired limit The problem is when the ecu is reset by turning the ignition off/on the car will restart and idle higher approx 2500rpm This can be adjusted down further to about 1500rpm but I reach the clamp limit ( min set @ 200) Why dose the idle change to a higher value when the ecu is reset? And what is the min clamp limit for this ECU/ISC?

[Evolink G2 no Fan?]

PClink 3.32 Firmware v1.5.1 when will a new release with with fix be expected?

[Evolink G2 no Fan?]

I am in the process of setting up a G2 plugin on my evo1 so far i am unable to have the engine fan come on (at all) I have changed the Aux9 ON temp in relation to the Engine temp readout, but so far the engine temp will rise past this point and the fan will still not switch on I have confirmed the fan still works by swapping back to the original ECU Any ideas?