[knock detection on linkplus]

I have a linkplus v14 on rb30det. The tune is a bit messy so i have bought a wideband and done a bit of data logging. I have attached a pic of rpm, map, and knock from the link. How accurate is the knock detection on the link? The knock reading is usually around 1-2 and above 4000 rpm with boost the knock goes up a bit. the highest reading is around 40. One the link manual it seems to say that knock goes up about 10 per 1000 rpm. Is it knocking? Or do i need one of those headphone type sensors?

[linkplus and gtr/gts4 attesa questions]

I found this post about the same problem. http://www.linkecu.com/forum/forums/lem/831094775 Can i buy the bit that outputs the signal and solder it in to my loom? thanks

[linkplus and gtr/gts4 attesa questions]

I am in the process of building a gts4 with mostly gtr running gear and gts4 electrics. I have a linkplus v14 ecu. The factory 4wd computer has 2 inputs (possibly 3) from the factory ecu, for throttle position . Did the old gtr link have an output for this? Is there an output on the linkplus? Or should i hook the tps in parallel to the link and 4wd tps inputs? Any help would be appreciated. Thanks