[VQ30DE Sync Firing order etc]

Hi Scott

Yes there is Dip switches on main board. What should these be set too.

Thanks.

[VQ30DE Sync Firing order etc]

Thanks Scott I took cover off computer and it has a different Sub board as the one in info. SUBMAXI 231104 its a VQ30DE I think info is for the VG30 with adjustable CAS.

Dosnt look like anything is adjustable is this correct Sub board for my engine.

Main board D42V5E  170806

Also have wired injector driver inj1 to bank number 1 and inj2 to bank number 2

Cheers.

[VQ30DE Sync Firing order etc]

Hi. I have just finished wiring a G1 V5 (old girl) link to a Vq30DE and ran up and getting a problem when I crank it sounds like firing order maybe out.  but wanted to check if I had firing order correct. Engine dose start and run.

You guys set computer up with correct sub board etc so that side of it should be all o.k. and have uploaded tune off a mates engine that was running fine but cant check wiring has he has since sold boat.

Nissan firing order 123456

I have wired IG1: 1and4    IG2: 2and5    IG3: 3and6

Is this correct as was reading in the manual about sync?? Do I need to change firing order to suit computer? if so could you tell me the correct way to wire.

Any help would be appeciated.

Thank for you time.

[VQ30DE]

Hi Was woundering if someone could help. Im wiring a G1 V5 to a VQ30DE in a boat and I see the engine has two crack angle sensors which one do I wire in the front one that runs off cracnk pully or the rear that runs off a trigger plate on flexi plate. The front one only has a coulpe of  trigger points the rear has teeth all the way round on trigger wheel.

Thanks.