[08 JDM STi Engine with G4+ Wire In ECU]

Great idea !

 

[5v An input control for Shift cut]

Hey Guys !

 

Just wondering if you were going to make provision for gear cut based on an AV 0-5v sensor Ie gearshift lever sensor for shif cut ?

Lots of customers with sequential boxes these days...

Thanks !

 

KPA

[Mixture map]

Are we able to log, target afr and actual AFR ?

Thanks !

KPA

[BMW M54 Themostat]

Hello,

Best way is to remove the electonic thermostat. Replace with a gutted thermostat housing and install a restrictor plate to slow down the flow of the coolant !

Cheers !

KPA

[LC-1 questions]

Hello Felix.

 

A few errors there buddy.

Narrow band is actually 0-1.2 volt max the scale is aways rich to lean...

Wide band is indeed 0-5v But 0v is 7.35 AFR and 5v is 22.39 AFR

[BMWS62]

Actually me too !

 

Please send it to me also !

 

[email protected]

[File name in saving protocol]

Hello Jurgen,

With this we are able to know quickly which file was saved. It prevents Map versions screwups and so on and so forth...

 

KPA

[G2 Link Queries]

I have something i can send you.

 

Send me and email and i will send it to you !

 

[email protected]

 

Cheers !

 

KPA

[G2 Link Queries]

chassis ground. on the engine or frame.

 

cheers

[G2 Link Queries]

ECu ground to the batt - through the chassis if you wish.

Sensor ground: from sensors to the ecu terminals only.

 

Do not connect the together.

 

KPA

[Bmw S54 Trigger error]

Notice there were 3 wire sensors that were reluctors.

 

sig-grnd-shield

 

That might also be the problem.

 

KPA

[Bmw S54 Trigger error]

Hello guys,

 

We have done 4 installs on a S54B32 engine ALL with the same problem at diff RPM and the solution we found was swiching the wires on the connections... are you using the original sensors ?

 

Thanks !

KPA

[File name in saving protocol]

Gents !

 

Here is another brilliant idea like the telephone from Canada !!

Being able to save the file name in the ecu and being able to retreive the file from the ecu WITH the name !

 

Thanks !

 

KPA

[please help with vanos E46 M3- S54 motor... getting massive error counts for cams]

Hello You need the following connections: \ AUX 1 VVT inlet right AUX 2 VVT inlet left AUX 3 VVT exh right AUX 4 VVT exha left DI 1 cAm pos inlet LH Trig 1 crank Trig 2 Cam Tri g 2 VVTI exh LH trig offset 270 deg... Try that KPA