Jump to content

Nicholas Dang

Members
 View Profile  See their activity

  • Posts

    3

  • Joined

  • Last visited

    Never

 Content Type 

Posts posted by Nicholas Dang

  1. Possumlink V5 Wrx MY00 Idle Issue

    in Link G1

    Posted

    I tried slipping the clutch to slow the idle down but it didn't seem like make a difference. The only way I was able to get the idle down to 1000rpm was to use the stock ecu until the idle was about 900-1000rpm. I then Disconnected the idle stepper motor. Plugged the Link in and left the idle stepper motor disconnected. It doesn't seem like the Link can control the idle.

  3. Possumlink V5 Wrx MY00 Idle Issue

    in Link G1

    Posted

    Hi guys I've got a V5 Possumlink (WRX99R - on the chipset) that I plugged into my MY00 wrx (not STI) to tune. My tuner and I came across a problem where the Link is unable to adjust the IACV. *This was tested by plugging in the stock ECU to test if the IACV was working* When the Link is plugged in, the IACV does not move (makes noises but the rod does not move at all) which causes the idle to sit at 1800-2000rpm on idle. Can it be that the LINK is faulty? Or are there settings that we can change to fix this. Thanks in advance. Nick

×
×
  • Create New...