William Grant
-
Posts
2 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by William Grant
-
-
I have a bigport 4age from a AE86 levin, and I am using a link V5e. I've had a browse through a lot of forums and havent quite found what I need just yet.
I am having a bit of trouble wiring in both the TPS and igniter. Firstly the link manual says for the TPS i must use 3 wires, My factory TPS has 4 pins and I dont know which ones to use, I know one is ground but struggling to find out what the other 3 are for.
Also the igniter has 5 wires in and Im stumped on what to do here, I plan on using a distributor setup using only IG1 on the LEM. So any info on this is greatly appreciated.
Cheers,
William
4AGE 16V TPS and igniter, V5e
in Link G1
Posted
Thank you for the quick response, If you could also shed some light onto the Distributor/ Cam angle sensor wiring would be greatly appreciated.
I believe it is a "Optical /hall sensor" type distributor, so i have to use the +12V optical/hall sensor power supply wire along with Trig 2. Basically I need to know the pin out of the distributor wires so I know which wire goes where.
Cheers,
William.