Jump to content

ken1436215443

Members
 View Profile  See their activity

  • Posts

    53

  • Joined

  • Last visited

 Content Type 

Posts posted by ken1436215443

  9. link g3 to g4 update with g4 look

    in Link G2 G3

    Posted

    Hi all

    I have always used the g4 extreme software and i love it. I recently picked up a G3 plus for real cheap. I was wondering if I upgrade to the g4 firmware will my software and home page layout will look the same as the g4 extreme homepage? And will I be able to use the G4 maps?

  12. syncing base ignition timing on a 13b engine

    in Link G4

    Posted

    Here how I did mine... First I put the split timing map to -15 degrees then I locked the ignition timing to -5 degrees clamp the timing light to the front rotor trailing plug (top plug closest to the radiator). Check the timing and its out about 110 degrees timing mark is at the lower right. Once I move the timing back to the oem -20 degree mark the car run horrible. I wired the car using LQ9 gm coils rotary direct spark ign 1 to L1 ign 2 to L2 ign 3 to T1 ign 4 to T2. The car run and idle fine without syncing the ignition not sure what I did wrong!

    IMAG1982.jpg

  14. rotary direct fire ignition set up

    in Link G4

    Posted

    Hi

    Im looking to set up my 13b running direct fire ignition instead of waste spark. Im running 4 LS LQ9 coils with a wired in g4 extreme ecu. The car is running perfectly with waste spark setting. How do i set up the pclink to run direct and how should the ignition signal wire be configured so the ecu know which one is leading and trailing position?

×
×
  • Create New...