amvegeta
-
Posts
31 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by amvegeta
-
-
ok thanks!!!
-
-
ok, what do you recommend to me then? I think I saw a sensor on the link site that did both!
-
Hi,
I want to plug this 2 sensors on my link g4, how can i do?
https://prosportgauges.com/products/premium-oil-fuel-pressure-sender
https://prosportgauges.co.nz/products/prosport-oil-and-water-temp-sensor-scarles
regards!! -
Hi,
I would like to know if there are optimum settings, in order to have a good reactivity. Indeed for the low speed and mid speed it goes more or less, but for the high speed the cursor goes much too fast ...
Can i have settings for low, mid et high speed?
regards.
i use quick tune on road because i didn't have dyno.
-
Can i do the same thing with a link G4?
regards!!!
-
Because I have an innovative and I saw that you have advised in another post, the X-Series Wideband UEGO AFR Gauge Sensor Controller (PN 30-0300)!
Is the model cited compatible? -
Hi,
Can we use a can lambda on a G4 plug in?
-
Can you help me, for wiring and changes in pc link?
-
Hello,
I have a Subaru Gc8 V6, and I would like to put a bigger body throttle. Unfortunately I only find throttle body for V7 sti, with a link G4 is there a way to put the throttle body full of the V7 (throttle position sensor V7 on V6)?
Regards.And idle sensor?
-
Hi Dave,
Apologies, as I looked at the picture on my mobile phone, so I did not see that there was anything I needed.
thank you very much, when I rode I tell you, but I think it will go.Regards
-
Yes this is what i want.
But i don't know how to do it? What output to use?
Could you give me a documentation, like a how to do it, because i never do that?
I'am not a pro. Lol.
Regards.
-
Hi,
Thank you.
But I wanted to put a configuration switch to change the fuel map 95 has the fuel map of competition.
Regards.
-
Hi,
Nothing new about the problem with the pictures?
-
There is a problem with the gif.
And can you explain me, how to put a switch on off to select the maps please.
Regards.
-
-
hi,
can you give me the procedure to be followed to put a swtich (on off) for two different maps.
if you have pictures or manuals, i take too!!!
Amvegeta
-
I wanted to take a 3bar or 4bar sensor map, what you advise me?
-
Hello,
I would have if there are sensor map you advise more than others, for use with a Link ECU G4?
I had a map of 7bar sensor ecu link, but this one is hs, so I have to change !!!
so I put the original (1999 subaru wrx europe GC8), what is the limit of this one?Regards.
vgta
-
But i have a G4!!!! It's not possible with the G4?
-
Hello,
I wonder if it's possible to have a rolling launch control with antilag? Which would be initiated by a button, like the Nissan R35 GTR Alpha 20 AMS.
Thank you for your response. -
Is it possible to have the antilag with my launch control to increase the turbo pressure during the launch control?
-
thank you.
-
Hi i want to know if it's possible with a LiNK G4 for subaru impreza sti V5/V6, to have 2 maps can be switched on the fly with button in car. And how to do it?
Regards.
Injector timing subaru
in Link G4
Posted
Hi,
I would like to know why on the base maps, the subaru have different injector timing values?
V1-V2: 360 BTDC
V3-V4: 400 BTDC
V5-V6: 360 BTDC
V7: 400 BTDC
V8: 400 BTDC
V9: 400 BTDC
V10: 470 BTDC
What would you recommend for a V5-V6 with aac cosworth in 278 ° ex 274 °?