[Wiring and Manual of the G4+ (Evo plugin)]

Hi do someone have the plug in of the ISC ?

[Mitsubishi non stable idle]

I have a problem related to the ISC 6 pole

when the car is being warmed up and driven in traffice...so that 1 st gear...stop....2st gear stop...

the engine goes from idle to 2000 rpm.....

and I will have to turn off the engine to reset the car again to normal......few minutes later it will redo it..

what can be the problem coming from? already changed the isc stepper motor with a new one.....same problem persisting

[mitsu iac valve]

Hi with the above reference to the ISC Aux 5 and 6 and 7 and 8 how should they be wired to the isc....they can be switch polarity etc?

[upgrading ignition]

I have a 4g63t fitted with link g4+. I need to upgrade the ignition from wasted spark with high tension wires to coil on plug conversion.

Can I still use the J722T ignition module as it is a 2 channel module?

 

regards

the datasheet is in the following link

file:///C:/Documents%20and%20Settings/wcassar.PHARMAAW/My%20Documents/Downloads/datasheet%20(1).pdf

[retarding safety feature]

Hi, what can cause the retarding safety feature to be enabled?

over boost......what else more can effect it?

As I am encountering the problem at 5500rpm approximately.