[RX7 new install injector settings]

Hi Adam,

Thanks I will parallel the wiring for the secondaries

I will look to get a cranking log when I am next able to get to the car.

I do have synchronisation with good spark triggering and fuel pump activation. The fuel system is pressurised but so far the plugs are dry.

I had the feeling that this was injector setting related and that they were potentially not being switched appropriatel?

 

 

[RX7 new install injector settings]

Hi,

I am at the end of an install into a track focussed RX7 with a Link Fury and need some help with a few settings;

I have spark but currently no fuel.

Specs;

2 rotor 13b with sequential 6 speed Elite gearbox

2 x primary ANSU 90/550 injectors

4 x secondary injectors ANSU 90/550 injectors

4 x AEM ignition coils

 

I am looking for some assistance around Injector settings, the injectors are 11 ohms, I have set it to sequential/staged but currently gives 4 injectors.

What do I need to do to add the extra injectors and what settings do I need?

 

 

I am sure I will need lots more help but would appreciate any assistance to get it running.

 

 

 

 

[12a turbo rotary flooding on crank]

thanks all, I will try and report back 

[12a turbo rotary flooding on crank]

Hi having some real issues getting the car to start when cold, it seems to flood out extremely quickly. once running she runs well albeit a bit on the rich side. standard 12at injectors (800cc)

I have attached the current map, any help much appreciated

 

thanks

 

chris

 

nov 14 2016.pclr

[12a turbo 2 injector settings]

Hi,

Following some teething problems I am now up and running with my Atom on a new installation of a 12a turbo into a Mazda Rx3.

Can anyone assist with settings to run only primary injectors?