bobby1945
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by bobby1945
-
-
I have a map - configured for MY99 440 injectors VF22 FMIC ultimate 98 fuel .Cone air filter. Been in my car since 2001 with no issues.
It would be a good starting point - not a base map though.
Let me know.
-
My hand controller is no longer displaying commands or data from the ecu.
The controller is powering up , as the display is dimly lit .
I have checked the cable for any open circuit and it appears intact.
Are there any serviceable parts on this unit and if so where are they available.
Thank You.
I thought about using my laptop , but I think this unit - G1 MY99 V5 only can be accessed via the hand controller .
-
No response , but I have fixed it by this procedure.
Remove Link ECU
Reinstall OEM ECU and AFM
Crank - Engine fired
Put back Link and remove AFM.
Crank - Engine fired
All back to normal.
-
My MY99 Subaru WRX -which I have owned since new failed to start this morning.
I have had a Possum Link in the car for about 15 years and it or the car has never let me down.
My battery is new 2 weeks and a full tank of Ultimate 98 - It turns over strongly , but no hint of firing .
Yesterday was fine.
Unfortunately my tuning controller no longer displays so I can't even check for error codes.
Any suggestions would be welcome.
Thank You.
PCLink
in Link G1
Posted
Assuming PCLink is compatible with my PossumLink v5.0 am I correct in my assumption , that the ecu map will be uploaded to my laptop permitting edit/tuning functions.
I have tried to open excel map currently on my laptop into PCLINK software , but the application does not recognise it.