jonas
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by jonas
-
-
Have tried 4 and 10 'High Scale' there was not any difference.
It could be something wrong with the cable from the ECU to aim?
We have made a new cable, others were broken at the connector to the ECU. It is something specielt with original cable?has attach a PCLog file
Jonas
-
Hi Scott.
I'm not sure it shows the values may not be with them in the log.
This is the base map, log and AIM setup file
Jonas
-
Hi Scott,
Have a look at the settings I do not see anything wrong. It still shows negative values of oil and fuel pressure, but when you turn on the ignition key so normally the value until you start the engine. Any other suggestions on what can be wrong?
Is there any settings you have to change when you go from the RS232 serial protoco to CANbus??Jonas
-
-
Thanks for the help.
-
-
AIM MXL starada coupled to a Link G4 extreme.
does not show oil and fuel pressure that is associated with RS232 serial protocol, it only shows dashes on the instrument, what could be wrong? The values demonstrate the PcLink as they should. -
If there are problems with the new firmware. it is possible to reverse to an older firmware?
-
Firmware update from 4.7.0 to 4.10.2, it will be any problem to do that? Is there something you should consider before you do it?
problems with AIM MXL
in Link G4
Posted
No, I'm from Sweden.
Did you find a solution?