[About ALTEZZA fuel gauge]

49 minutes ago, Adamw said:

What issue do you have?  Has yours been tuned in modeled mode? 

Provided your ecu is less that about 3 years old it will work correctly for models 2001 and earlier.  Some of the older ecu's may need a code update in the BEAN controller.

 

it is a Feb 2019 manufactured ecu, tuned using the basemap for altezza in the pclink software which I believe is a modeled fuel.

[About ALTEZZA fuel gauge]

has this issue been resolved? having this issue on a altezza 280t using the g4+ plugin ecu... 

[s15 VCT set up]

Any s15 plugin users?

[s15 VCT set up]

On 01/12/2017 at 8:58 AM, rrob said:

Add a 3rd condition that's minimum 1.5-2% TP main.

Cant do that in the cam switched...only rpm refference...

Any other suggestions? Its the correct output to the vtc solenoid...but engine unstable when switched on....

Do i need to retune the car if i intend to switch the vtc on since my last tune was without the vtc activated? 

[s15 VCT set up]

9 hours ago, rrob said:

Add a 3rd condition that's minimum 1.5-2% TP main.

2% throttle position? ...ok will  try and add that condition...

[s15 VCT set up]

Hi again...

Set the vtc control On at 1050 rpm to 5700rpm...but problem is when the rpm is around idle... the vtc turns on and off causing the car to idle badly...almost stopping the engine...any ideas on the set up if im doing it correctly...

[s15 VCT set up]

thanks simon..going to try it out

[s15 VCT set up]

hi all,

quite new to tuning so please bear with me...my S15 rattle is louder after installing the plugin ecu..

Is the S15 VCT control already set up when using the S15 plugin ecu or do we have to manually set it up? if yes how do we make the adjustments for the VCT solenoid control vs rpm...thanks