[13b six injectors how to]

Hi Guys

 

I've a link G4 extreme ecu

 

Currently running my 13b with 4 injectors but going to add 2 more on the secondary rail for a total of 6 injectors. Is this possible to sort easily in the programming?

 

Thanks in Advance

 

James

[Fd3s 13brew half bridge. 610hp 510tq]

Hey guys

Just finished tuning my 97 fd3s on a G4 Extreme ecu and we made 610bhp using water meth injection. Aem coils, aem wideband walbro 450lph pump and Bosch 1650 and 750cc injectors on a half bridge with large D type exhaust ports.

 

Ecu is awesome and very tuneable compared to the Apexi unit that came out of it!

[No lambda reading g4 extreme on fd3s]

Ah ok thank you. Thought the lambda needle was registering before so wasn't sure if I had an issue or not. Car has only done 250 miles on ecu approximately. 

[No lambda reading g4 extreme on fd3s]

Won't let me attach a file to my posts. I have a stock O2 sensor and also an innovate wideband but it's not connected. Ecu is very new so I'm not used to the settings yet! 97 fd3s

[No lambda reading g4 extreme on fd3s]

Hey guys

I'm getting a 0 reading on lambda avg and highlighted in red in my fd3s. Lambda Needle on display isn't moving either on acceleration?

 

 

 

[Connecting Asus Zen to G4+ in fd3s]

Thank you very much for the reply. Lots of detail there. Will ask my tuner to look into this next time I'm in!

 

James

[Connecting Asus Zen to G4+ in fd3s]

Hey guys. I'm looking to connect my asus to my link and have downloaded the torque app and have a cable to connect between the 2. What else do I need to do to get them to communicate please?

Also the link had an issue running my omp. Kept on coming up with out of range errors. Limiting to 2.5k Eventually had to switch it off and run full premix for now!

 

Thanks in advance for any help

 

James