Bram_44
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Bram_44
-
-
Hello ,
My first (and maybe stupid) question on this forum:
I have a engine strapped on the engine dyno from which i struggle to get a starting rpm during cranking.
The concerning setup has a custom trigger setup (60-2 / reluctive / air gap 0.9mm) and is controlled by a Link xtreme ecu (program attached: 3s-gte).
Already tried a few options:
-Triggerscope is getting signal(also attached: Trigger_1)
-Polarity swap of the reluctor sensor.
-Setting arming treshold at different values (included it's minimum value of 0.2)
-Setting different values for filtering
Normally i would swap over to a hall sensor but since the wire loom is already twisted and tucked in raychem this isn't one of my options...
Can anyone tell me if i'm missing something?
No rpm during cranking - Reluctive sensor
in G4+
Posted
Problem solved,
Since it's my first experience with a link ecu i have overlooked the cam sync pulse..
Thanks for the quick support Adam!