Mendiesel
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Downloads
Posts posted by Mendiesel
-
-
Been searching and though I’m running a vipec v44/v88 top board it was relevant to me
I’ve change to direct spark and imported a dwell table to suit the coil packs. The car does run but now it very hard to get started
I’ve set the trigger offset from 5 degrees to -355 seeing as it was probably 360 degrees out
once it does get started from holding the throttle fully open it runs fine
Any ideas why it would be so hard to get started now?
Evo 4-8 Direct Spark Issue
in G4+
Posted
Thanks for the quick reply mate, spent a bit of time on it last night and as embarrassing as it is, I took a 12v switch to the relay which ended up having low power as crank so my ignition was extremely weak. Problem is solved but I’ve found another but that’s a temperamental wire at the ecu which I’m trying to trace.