[Problem with v88 on 1.8t ethtottle]

On 4/23/2018 at 1:13 PM, Adamw said:

Yes, since that time in the G4+ range we have added new data into the pre-configured CAN stream to cover a wider range of later model cars including the Ibiza, but you do not have that option with an old V88.  

Hi,

i want to upgrade to G4+, You sure i can to coded for ibiza 6l?

Thanks!

[Problem with v88 on 1.8t ethtottle]

6 hours ago, Adamw said:

The MAP sensor is inside the ECU case - it is not connected to any external pin.  It is on ANVolt 1 and MAP sensor type should be set to "2.5Bar".

 

The ABS lamp probably means the CAN bus messages in your car are a little different than the Audi TT that the ECU was designed for.  You are unlikely able to fix that with a V series as the user configurable CAN is only basic.

i understand, Thanks you!

[Problem with v88 on 1.8t ethtottle]

i found this topic: 

it's same problem with g4+, i change in configuration to GOLF GTI and the abs was gone but the esp still light on.

 

 

 

 

 

[Problem with v88 on 1.8t ethtottle]

v88 - plug-in ECU 

[Problem with v88 on 1.8t ethtottle]

Hi

i found the problem with throttle, it’s like i88 in my wiring.

i have another issue, i think the MAP sensor pin nou same, I’m try to MAP calibration and i get error.

elso what about esp/abs, v88 can be work? Because the light is on in the clock.

My car is ibiza 6l bjx engine.

Ecu: ME7.5 ( part number: 06a906032qn )

[Problem with v88 on 1.8t ethtottle]

Hi ,

i got v88 from my friend i install on my car and i get error 70.

i think the configuration not good, i check the manual and the pin layout not same the map ( audi tt base map )

v88  can be replace the me 7.5?

i need another map?

 

thanks

[How activated VVT on Vw 1.8t v88TB]

Hi,

i my engine the VVT is like cam switcher, i read i need to set on aux output inj - aux 8 to Cam switcher, it's true?

[How activated VVT on Vw 1.8t v88TB]

Hi

i have v88tb in my car, how i can to activate the VVT map?

elso someone have base map for VVT?

thanks