Guest |156| Posted March 29, 2011 Report Share Posted March 29, 2011 Just wondering? is it possible with v88 can you run 6 high impedance injectors (sequenchal) and have 6 low impedance as secondarys and if that is possible? can they be run sequenchal or do they have to run group fire? :roll: Quote Link to comment Share on other sites More sharing options...
rayhall Posted March 29, 2011 Report Share Posted March 29, 2011 The V88 has an axillary injection feature. This uses unused injector outputs for staged injection. The setup on a six cylinder engine is 6 x sequential primary injectors, and six secondary wired in two groups to injector outputs 7 and 8. Care must be taken that you do not exceed the 10 amps of the injector drivers if this is a road car. On drag cars some people have used 12 x 6 ohm injectors on the primary and 6 x 6 ohm on the secondary. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |156| Posted March 30, 2011 Report Share Posted March 30, 2011 The injectors I have are: primary are 12.5 ohms and the secondary are 2.1 ohms Its a road car so Im guessing that its not going to work? or should I try and use two sets of low impedance injectors? Quote Link to comment Share on other sites More sharing options...
Guest |156| Posted March 31, 2011 Report Share Posted March 31, 2011 :?: Quote Link to comment Share on other sites More sharing options...
rayhall Posted March 31, 2011 Report Share Posted March 31, 2011 You can do this. Primary = 6 x 2.1 ohm injectors (sequential) Secondary = 6 x 12.5 ohm injectors (multi group) or Primary = 6 x 12.5 ohm injectors (sequential) Secondary = 6 x 6.0 ohm injectors (multi group) Quote Link to comment Share on other sites More sharing options...
Guest |156| Posted April 1, 2011 Report Share Posted April 1, 2011 Thank again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.