Thom Posted January 31, 2014 Report Share Posted January 31, 2014 Hello, I have searched for this through the help files with no success. When setting up a Digital Gauge, there is no mention on how to adjust the level past which the data will be displayed in a red background colour. The closest I think I have found to this topic was adjusting the values in the "Fault Settings" window, but it made no difference, and my EGT digital gauge keeps displaying in a red background even when EGT is below 500°C... Thanks. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted February 1, 2014 Report Share Posted February 1, 2014 Hi Thom, to be honest I have never tried to have a digital guage change colour at different warning levels. I know that it is possible to setup the warning colours, like orange and red on Bar and Dial type gauges. EG : I have my PYROS setup on 1 page as bar graph with the settings as follows Visual Settings = Manual Minimum =0.00 Maximum = 1200 Small divisions = 4 Large divisions = 5 Low yellow line = - 1.0 (minus) Low red line = -1.0 (minus) Decimal places = 0 High yellow line = 700 High red line = 900 Dial guage for my pyros are setup with the same values. Hope this helps Regards Dave. Quote Link to comment Share on other sites More sharing options...
Thom Posted February 1, 2014 Author Report Share Posted February 1, 2014 Thanks Dave. Yes I know it works for a Dial Gauge, as explained in the Help files, but surely there must be a way to adjust this with a Digital Gauge as well, as when I'm not Online the gauge shows a black background...? Thanks. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted February 2, 2014 Report Share Posted February 2, 2014 Hi Thom, I was very brain dead yesterday, the joys of recovering from a double stroke. If you go to the Parameters TAB on the left side of the screen, below ECU Settings, Log File Manager etc. Open the parameters TAB go to the Analogue input etc you wish to adjust the warning values for, it is all done here for your digital gauges, Regards Dave. Quote Link to comment Share on other sites More sharing options...
Thom Posted February 7, 2014 Author Report Share Posted February 7, 2014 Hi Dave, It works, thank you. Really sorry to hear about your health issues, a double stroke is something serious!! Best wishes for a full & quick recovery. BR, Thom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.