Dima Posted July 8, 2014 Report Share Posted July 8, 2014 Hi guys, Let me know please how can I ON AFR target overlay table? I want to use it for using pump gas and race gas with close loop. thanks Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted July 8, 2014 Report Share Posted July 8, 2014 Hi Dima, I have attached a screen shot of how to activate the AFR overlay. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Dima Posted July 10, 2014 Author Report Share Posted July 10, 2014 Thank you its very simple to switch ON in the main menu, but under what condition it will be turn ON? I want to use some DI for switching race gas maps, so should I select Overlay table in the Dual fuel table and DI? Dima Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted July 10, 2014 Report Share Posted July 10, 2014 Hi Dima, sorry for not giving you the complete information. :oops: I have attached the full set up. You are correct in you thoughts of how to set this up. I have also added a screen shot of the same setup but I have added a Virtual AUX for some extra control. This way you could leave the DI turned on and when other conditions are met in the Virtual AUX the Overlay table would become active, just an extra idea for you. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.