Kerem Erdag Posted January 5, 2015 Report Share Posted January 5, 2015 Hi There, The aim is to get rid of boost and AFR gauges and display the info on cluster gauge LCD on BMW E34. Sending the data to LCD is a matter of an arduino and some code. My question is; does G4 storm stream this data through rs232? If yes, what are the parameters to capture this data?  Thanks, Kerem Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 5, 2015 Report Share Posted January 5, 2015 Hi Kerem, the answer is yes. If you use the HELP file you will find all that you need. Read everything, if you need some more advice ask away. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Kerem Erdag Posted January 6, 2015 Author Report Share Posted January 6, 2015 Ah! I didn't notice that. Thanks for warning. Quote Link to comment Share on other sites More sharing options...
redmist Posted January 27, 2015 Report Share Posted January 27, 2015 Kerem, I'm doing something similar with a Raspberry Pi (to be ported to a Banana Pi). Don't forget that the Arduino doesn't support RS232 on the board (much as the Pi doesn't, the Banana Pi has CAN). You'll need a shield or an external MAX232 (or similar).   Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.