chris briggs Posted May 21, 2010 Report Share Posted May 21, 2010 I am in the process of hooking up my ethrottle. I have it wired correctly. It makes it through the opening and closing of the throttle plate, but when it does the 3rd TPS test it says..... something like... Error 16 not able to reach 98% target. What am i doing wrong? thankyou Quote Link to comment Share on other sites More sharing options...
chris briggs Posted May 21, 2010 Author Report Share Posted May 21, 2010 I think there is a setting that i still off on. The third test is comparing the Main to the SUB in the throttle tps test and it comes out with that error 6 code. The first Main test was fine, the SUB test was fine. Just the comparison after.... thanks Quote Link to comment Share on other sites More sharing options...
chris briggs Posted May 21, 2010 Author Report Share Posted May 21, 2010 actualy verbage error 16: cannot reach target 98% Quote Link to comment Share on other sites More sharing options...
chris briggs Posted May 23, 2010 Author Report Share Posted May 23, 2010 Okay update: no more errors. But i still cannot get the calibrated pedal and throttle to work with each other. Pedal does not open or close throttle even though i see the voltages changing on the software. ECU is the only one that can open or close the throttle are my PID settings off? Are my targets off? (going 1 to 1 ratio) Pedal should control throttle plate when in ON position correct? Also when it is done calibrating the throttle plate, there is still a buzzing when it is at rest, this is why i thought my settings were off also. thankyou in advance Quote Link to comment Share on other sites More sharing options...
Cameron Moore Posted May 23, 2010 Report Share Posted May 23, 2010 Hi Chris, I've found your problem. Your E-throttle target table has TP as the Y axis. The Throttle Position (target) is the value in the table. The Y axis needs to be Foot Position (FP). That way the table will cross reference your foot position vs your RPM, and choose a target for your Throttle position. Fix this and you should be sorted. -Cameron Quote Link to comment Share on other sites More sharing options...
chris briggs Posted May 24, 2010 Author Report Share Posted May 24, 2010 Cameron you were exactly right. Ethrottle works perfect now! Thankyou Very much guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.