motionper Posted September 13, 2014 Report Share Posted September 13, 2014 i am trying to activate the ic sprayer from aux 4 and use my map sensor to ground a solenoid by boost pressure but i can't get it to activate no matter what pressure i use Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted September 15, 2014 Report Share Posted September 15, 2014 Hi Bob, this is an easy request, can you please send your pcl file and I will set it up for you. Regards Dave. Quote Link to comment Share on other sites More sharing options...
motionper Posted September 17, 2014 Author Report Share Posted September 17, 2014 hi david i attached the file to the previous reply have you had a chance to look at it?? Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted September 18, 2014 Report Share Posted September 18, 2014 Hi Bob, sorry I have been very busy. I have the file now, I will sort it out today and post up the modified file. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted September 18, 2014 Report Share Posted September 18, 2014 Hi Bob, just checking I have this correct, You wish to activate an IC SPRAYER from AUX 4 which is the Boost solenoid and you wish to make AUX 3 the SPRAYER. You state that it is the fuel pump relay, however in the pcl file it shows as chassis power relay. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted September 18, 2014 Report Share Posted September 18, 2014 Hi, try the attached file and let me know if this is what you want. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.