Dave Kriedeman Posted January 5, 2015 Report Share Posted January 5, 2015 Hi Omar, I will try to have a look for you today. Sorry in advance for any delay, I am very busy, at present with doctors etc. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 5, 2015 Report Share Posted January 5, 2015 Hi OMAR, at a very quick look a master of 20 and a trim of -25% will be very confusing for you. Start with the above mentioned values, with fresh plugs, Regards Dave. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 5, 2015 Report Share Posted January 5, 2015 Hi Omar, use my attached PCL file and work your way from there. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 5, 2015 Report Share Posted January 5, 2015 Omar, when you save my file make sure you save it as 1.pclr not 1-pclr or it wont open. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Omar Allaga Posted January 5, 2015 Author Report Share Posted January 5, 2015 Hi Dave really appreciate your support but unfortunately file isn't opening even after correcting file type by replacing _ with . Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 6, 2015 Report Share Posted January 6, 2015 Hi OMAR, are you using 5.2.2 firmware. Where are you saving the file to, if it is not to the base file folder it will not open. You need to save the file to the 5.2.2 base files folder and the name should be saved as .pclr at the end. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Omar Allaga Posted January 6, 2015 Author Report Share Posted January 6, 2015 Hi Dave I am using the latest software version 5.3.0.2295 and file has been saved in the based map folder but still have the same problem Quote Link to comment Share on other sites More sharing options...
Omar Allaga Posted January 6, 2015 Author Report Share Posted January 6, 2015 sorry forgot to mention firmware version as it was updated to 5.2.2 that is included in the latest Pclink update Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 6, 2015 Report Share Posted January 6, 2015 Hi Omar, I may have to remote login to your computer . I do not know why it is not working. The other strange thing is that FIRMWARE 5.3.0.2295 is Dealer test firmware that we are testing ,I see that your software says 5.2.2. but states that the firmware is 5.3.0 very strange. If you go to my web site www.protuningcairns.com , go to the Remote tuning page down the bottom and download my free version of Teamviewer. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Omar Allaga Posted January 6, 2015 Author Report Share Posted January 6, 2015 I have sent you a PM with details   Regards  Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 6, 2015 Report Share Posted January 6, 2015 Hi Omar, sorry I was sleeping due to not feeling well, I have sent you an email regarding our time zones so we can workout a good time for me to remote login and help you. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.