Guest |167| Posted December 13, 2010 Report Share Posted December 13, 2010 Is it possible to add the wire colour to the pinout of the expansion connector in the manual of the plugin ecu's? It's a bit annoying when we need to open the ecu cover to be able to find the correct wire. Quote Link to comment Share on other sites More sharing options...
rayhall Posted December 13, 2010 Report Share Posted December 13, 2010 On the website under technical data there is a pinout for the V44 and V88 with wire colors. I always use this rather then the one in the software. http://www.vi-pec.com/techdata/V44-V88_Pinout.pdf Ray. Quote Link to comment Share on other sites More sharing options...
Guest |167| Posted December 14, 2010 Report Share Posted December 14, 2010 So what you are saying is that the expansion harness will always have the same colours on the wires as the corresponding wire on the A and B harness? Have not noticed that. Quote Link to comment Share on other sites More sharing options...
rayhall Posted December 14, 2010 Report Share Posted December 14, 2010 Okay I misunderstood what you were asking. Sorry cannot help with the colours. If you look on the plugin base board near the socket the functions are printed on the PCB. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |167| Posted December 15, 2010 Report Share Posted December 15, 2010 Then this should be a nice thing to add on later revisions of the plugin user manuals. Quote Link to comment Share on other sites More sharing options...
R/TErnie Posted July 24, 2012 Report Share Posted July 24, 2012 The expansion connector harness for the Evo 9 is as follows. Red - 5v Green - Ground White - AnVolt 6 All other wires are disconnected. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.