Guest |784| Posted December 28, 2010 Report Share Posted December 28, 2010 Hi, I have one question about the data recording system from the Vi-Pec V44. I want to know if is it possible to activate the logging on by one switch on dash board and when i want stop i switch off and i download after the data? Because i want use during some stage of rally. Do you know how to do for the setting? Regards Quote Link to comment Share on other sites More sharing options...
rayhall Posted December 28, 2010 Report Share Posted December 28, 2010 1. Select a digital input as a GP Input. Set the pullup resistor as on and the on level as low. 2. Connect the wire from the digital input to a switch that is connected to ground on the other side. 3. Select the digital input as the switch for the logger. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |601| Posted March 4, 2011 Report Share Posted March 4, 2011 Ray is this the same procedure for the v-88 just when we get to 3/select the digital input as the switch for the logger can't find switch for logger 1. Select a digital input as a GP Input. Set the pullup resistor as on and the on level as low. 2. Connect the wire from the digital input to a switch that is connected to ground on the other side. 3. Select the digital input as the switch for the logger. Quote Link to comment Share on other sites More sharing options...
rayhall Posted March 4, 2011 Report Share Posted March 4, 2011 Yes it is the same for the V88. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |601| Posted March 10, 2011 Report Share Posted March 10, 2011 is the active edge rising or falling thanks Quote Link to comment Share on other sites More sharing options...
rayhall Posted March 10, 2011 Report Share Posted March 10, 2011 Active edge falling. Ray. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.