Jump to content

Wang

Members
  • Content Count

    9
  • Joined

About Wang

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Wang

    Monsoon sr20det trigger

    My Ignition Timing is 0, so my Lock Ignition Timing is 0, and my Adjust offset until Ignition Timing matches the number above. Do you just arbitrarily set a number and try it out, or do you have a formula that you can calculate, and then how do you set + or -
  2. Wang

    Monsoon sr20det trigger

    Excuse me, when I am with a calibration trigger setting lamp ignition timing fiducial mark, I'm going to Adjust the camshaft position sensor, until ignition timing light alignment to mark or to Adjust Adjust offset until lgnition timing matches the number above, because I have tried this two way but I'm not sure which one is correct, so want to excuse me everybody, sorry I'm new It would be great to have video education,
  3. Wang

    Monsoon sr20det trigger

    May I ask if I can connect the oxygen sensor of my sr20det original plant to the monsoon?
  4. Wang

    Monsoon sr20det trigger

    One more question, if I want to abolish the MAF of my original car, shall I just leave the line unconnected?
  5. Wang

    Monsoon sr20det trigger

    Excuse me, do you have the basic map of sr20det? I'm link monsoon. Thanks
  6. Wang

    Re: BASE MAPS

    Excuse me, do you have the basic map of sr20det? I'm link monsoon. Thanks
  7. Wang

    Monsoon sr20det trigger

    Another problem is that when I set the ignition to be positive, my ignition timing lamp will not light up once it is turned on, and the crankshaft must be turned on several times before the lamp will light up. What is the problem
  8. Wang

    Monsoon sr20det trigger

    Hello, I have set the part you said, the Trig1, the 2 and the Eccs are all YES, and after the ignition timing is set, it still won't start, and it will fire the gun, sometimes it feels like it will start, but finally it won't start Hello, I have set the part you said, the Trig1, the 2 and the Eccs are all YES, and after the ignition timing is set, it still won't start, and it will fire the gun, sometimes it feels like it will start, but finally it won't start
  9. Wang

    Monsoon sr20det trigger

    I sr20det answered a Monsoon current won’t start ,trigger1 and trigger2 set,but l use my ignition timing light, lamp sometimes flash flash sometimes not I at present in the card for several days try many methods sometime good, the ignition timing calibration but is not start this section is where there is the problem
×
×
  • Create New...