OSF2004 Posted July 15, 2019 Report Share Posted July 15, 2019 Hi do i have setup the trigger calibration for my link? i did try to calibaret for the initial setup. but there is nothing change.. anything i should do before the calibrate? thanks Before william OSF Quote Link to comment Share on other sites More sharing options...
Gregconboy158 Posted July 15, 2019 Report Share Posted July 15, 2019 I assume it's still on stock dizzy? If so put ref timing to 16 degrees, try 119 in trigger offset and see if it'll start. When changing you need to make sure you press enter when doing changes otherwise it wont change. You'll also need a timing light to get the trigger offset perfect but it will start if you keep changing the numbers and its close. Keep trying and go up in 20s until its close then lower numbers each way. That's how I done it and then used timing light to get it perfect after it was close. OSF2004 1 Quote Link to comment Share on other sites More sharing options...
OSF2004 Posted July 15, 2019 Author Report Share Posted July 15, 2019 Thank U will try Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.